Change the Power LED Color on a PSP

The handheld PSP video game system has sold to players worldwide. This small, individual system is loved by people of all ages, and has been a hit since it was introduced to the market. With so many people owning this game system, it’s understandable that you’d want to make yours unique. It’s possible to change the LED color lights on your PSP. You’ll need to take care while disassembling and reassembling your PSP, but it is possible to do on your own.

Instructions

1. • 1

     Unplug your PSP from the power adapter, if it’s currently plugged in. Turn off the system. Slide the battery cover off and remove the battery. You’ll want your system shut down before changing the LED color.

   • 2

     Remove the screws that hold the faceplate in place. There will be two underneath the battery and two more underneath the warranty sticker. There are two more on the back right of the PSP and one last screw adjacent to the PSP’s serial number.

   • 3

     Cut the cables that connect the LED light to the PSP’s motherboard. These cables are red and located on the bottom righthand side of the PSP. Take the LED light and cables out of the PSP.

   • 4

     Strip the connection cables on your new LED light.

   • 5

     Solder the new LED cables to the PSP’s motherboard. You’ll want to solder the new cables in the same spot where the old cables were.

   • 6

     Set the new LED light in place by using a hot glue gun. Make sure that you give the glue ample time to dry before reassembling your PSP.

   • 7

     Reassemble your PSP. Replace all seven screws, tightening them so that the faceplate isn’t loose.

     Tips & Warnings

     • When choosing the correct LED lights to put in your PSP, make sure you get the right size. They shouldn’t be larger than the “E” in the word “liberty” on a dime.

     • The pieces of a PSP are small, and it’s easy to lose them if you’re not careful enough. Make sure to carefully remove and replace every piece of the PSP, keeping track of the screws and other parts. If you haven’t soldered before, you may want to have someone help you or show you how to do it before you attempt to solder the wires to your PSP.