How to wire a three-way light switch

Sometimes it is necessary to control a light from two different places; for example, the top and bottom of a stairway. When wired correctly, the light can be turned on or off from either switch. This can be done with two (2) three-way switches. To control a light from more than two switches, use four-way switches. There are several ways to wire three-way switches to a fixture. This is the simplest way.

Instructions

1. • 1

     Between the fixture and the first switch, run two-wire cable. Then, between the two switches, run three-wire cable.

   • 2

     The feed wire (from the power source) should be two-wire and will have a black wire and a white wire. Using a wire nut, attach the white wire from the feed to the white wire at the fixture.

   • 3

     The black wire from the feed will run straight through the fixture to the two-wire cable running between the fixture and the first switch. Using a wire nut, attach the black wire from the feed to the white wire of the two-wire cable running between the fixture and the first switch.

   • 4

     Using a wire nut, attach the black wire from the fixture to the black wire of the two-wire cable running between the fixture and the first switch.

   • 5

     Go to the first switch. The white wire coming from the fixture should be attached to the dark colored screw on the switch. It is a good idea to mark this screw with paint or a permanent marker to indicate that it is “hot”.

   • 6

     Take the red and white wires from the three-wire cable running between the two switches and attach them to the light colored screws on the first switch.

   • 7

     Attach the black wire coming from the fixture directly to the black wire running between the two switches with a wire nut. The black wire should not be attached to the first switch.

   • 8

     Go to the second switch. Attach the red and white wires to the light colored screws and the black wire to the dark screw.

   • 9

     Test your switches. You should be able to turn the fixture on or off from either switch.

Tips & Warnings

• When stripping your wires, only strip the amount you need. Be sure you do not have bare wires touching each other. This can cause a short, which can result in a tripped breaker, blown fuse, or (worst case scenario) fire.

• Always tape connections made with wire nuts to avoid bare wires contacting other bare wires.

• BE SURE TO CUT THE POWER TO THE AREA BY TRIPPING THE BREAKER OR

• PULLING THE FUSE BEFORE WORKING.

• Always replace switch covers to avoid the risk of electric shock.

Genesis GMT15A Multi-Purpose Oscillating Tool Review

Product Description

Attachments for a Variety of Projects
Unlike traditional power saws, the Genesis GMT15A Multi-Purpose Oscillating Tool employs a 30-millimeter flush cutting saw blade to make precise cuts along edges and in tight corners. You’ll marvel at how easy it is to trim narrow door jambs or base molding.

To make cut-outs in wood, plastic, or drywall, you’ll want to use the 3-inch flat saw blade. The rigid scraper blade makes pulling up old vinyl flooring or carpeting no problem. The scraper also comes in handy for chipping away at stubborn paint layers.

The Genesis GMT15A Multi-Purpose Oscillating Tool can also be utilized as a detail sander. Just attach the hook-and-loop sanding pad and sandpaper for dry sanding of wood, plastic, or metal surfaces. For additional options, a grout blade or flexible scraper blade can be attached (not included).

Lightweight and Powerful
Weighing less than four pounds, this lightweight tool is constructed using die-cast aluminum gear housing, which improves dissipation of heat and increases service life. A four-pin flange design holds accessories firmly in place to guarantee safety. And with speeds of up to 21,000 oscillations per minute, projects can be completed more efficiently.

UL listed, the Genesis GMT15A Multi-Purpose Oscillating Tool is rated at 1.5 amps and 120 volts for safe, reliable operation. It is backed by a two-year warranty, which includes complimentary toll-free customer service and technical support. The Genesis GMT15A Multi-Purpose Oscillating Tool should be used only with Genesis oscillating tool accessories.

Use the Genesis Power Tools Multipurpose Oscillating Tool as a detail sander, close-quarters saw, power scraper, or grout removal tool. It is a versatile tool for home repair, remodeling, and restoration. It features a 1.5 Amp motor that delivers 21,000 oscillations per minute, and it has a sturdy die-cast aluminum gear housing. The 4-pin flange holds accessories firmly in place. This tool is great for trimming door jambs for flooring installation, removing old caulking, glue or paint, taking up vinyl flooring or carpeting, chiseling out door hinges, or trimming cabinets for installation.

Product Features

• Multifunctional tool for home repair, remodeling, and restoration
• 21000 oscillations per minute for fast sanding, grinding, cutting, and scraping
• 4-pin flange design holds accessories firmly in place
• Sturdy die-cast aluminum gear housing
• Includes 3-inch Delta sanding pad, sandpaper, scraping blade, 30 mm E-cut saw blade, HSS segment saw blade, and allen wrench

Designed for home remodelers and do-it-yourselfers, the Genesis GMT15A Multi-Purpose Oscillating Tool is an all-in-one solution that deftly handles cutting, sanding, scraping, and grinding. Thanks to its unique oscillating head and multiple attachments, the GMT15A quickly and easily tackles projects that once required long hours and expensive specialty tools. Whether you need a detail sander, close-quarters saw, drywall cut-out tool, power scraper, or grout remover, the Genesis GMT15A is the ideal tool for the job.

Tips to Set Up an Electric Fence to Run on Solar

Many horse owners and ranchers use solar-powered fence energizers to electrify their pasture fences. The units are particularly useful if the pasture is isolated or located a great distance from grid-supplied electrical power. A solar panel mounted on the unit converts sunlight into electricity and charges a battery housed within the unit. Once your fence wire has been strung, installing the energizer is a fairly straightforward task.

Instructions

1. • 1

     Select a fence post where you will install the solar energizer. It should be in a sunny area with no shade. In most cases, a southern exposure provides the solar panel with the maximum amount of daylight.

   • 2

     Drive screws or hammer nails into the fence post. Hang the fence energizer on the screws or nails.

   • 3

     Drive the grounding rod into the soil with the sledgehammer. Drive it until only 3 to 4 inches remain above the soil surface.

   • 4

     Attach the power wire to the power terminal of the solar energizer. The color of the power terminal may vary, depending on the manufacturer, but it is usually red. Follow the manufacturer’s installation instructions in this regard. Wrap the other end of the power wire around the fence wire. Secure it with a generous amount of electrical tape.

   • 5

     Attach the grounding wire to the ground terminal of the solar energizer. Wrap the other end of the grounding wire tightly around the top portion of the grounding rod; it is not necessary to secure it with electrical tape.

   • 6

     Turn on the solar energizer. If the batteries are already charged, the pulse light will begin blinking as electricity is sent down the fence wire. If the pulse light does not come on, or if the integrated voltage meter reads very low, turn the energizer off for several days to give the solar panel time to recharge the battery. Once this interval has passed, turn on the energizer.

      

      

Campbell Hausfeld HV3500 65 CFM Fine Finish HVLP Paint Sprayer Review

Product Description

High-volume low-pressure (HVLP) systems like the HV3500 work best in situations where you’re applying a fine finish as opposed to a heavy coat of paint or varnish. In other words, you wouldn’t want to use a system like this to paint your house-it would take forever. If you’re working on smaller projects involving stains, polyurethane, or even thinned latex paints, however, HVLP is the way to go.With HVLP systems, turbine size plays a big role in determining how fine your paint mist will be. The HV3500 includes the HV3000 turbine, which gives you enough power (65 CFM/6 PSI) to deliver a fine mist and to allow you to get a heavier coat if necessary.

The professional-grade spray gun is well-balanced and comfortable to use, and it can be attached to the hose at the rear or the bottom, depending on your preference. I had some trouble with running stain on practice runs, but soon got a feel for the best combination of air flow, movement, air-cap setting and proximity to the surface to get a nice, fine finish.

This is a quality product from a respected manufacturer, and is a great option for providing fine finishes on smaller projects.–Josh Dettweiler

What’s in the Box
Turbine, gun, 25-foot air hose, stub hose and quick-connect fitting, wrench, viscosity stick, cleaning brush

Product Description

Campbell Hausfeld packaged this system with a professional spray gun for greater flexibility when finishing cabinets, doors, trim, woodworking and metal projects. The high-performance/professional 3-stage turbine motor provides more power and longer life for applying most finish coatings: lacquers, stains, enamels, clear coats, varnishes, oil- and water-based coating and other solvent-based materials with flash points higher than 99deg F. It can also spray latex and water-based coatings, though some thinning may be required. Paints and solvents that contain hydrogenated hydrocarbons should not be used with this system.

Product Features

• Fine Finish HVLP paint sprayer adjustable spray gun and turbine
• Ideal for painting fine furniture, cabinets, and equipment
• Adjustable spray gun controls to create fine finishes
• Quick-indexing pattern shape adjusts to round, vertical, and horizontal shapes
• 12.5-by-22.5-by-12.5-inches at 34-pounds; 5-year limited warranty

Fuel OptiMiser Review

Product Description

 

In an independent study, the Fuel OptiMiser was proven to increase gas mileage up to 24%! We could all use a little easing of “pump pain”. Thankfully, the Fuel OptiMiser is here to help! The OptiMiser attaches to the fuel line of any vehicle in seconds. Using the principle of magnetics, it can help distribute the fuel molecules more evenly by increasing the distance between them. This can put more oxygen between the particles, increase their ability to burn and result in greater fuel efficiency and lower emissions. An independent study showed use may result in a 24% increase in mileage, and a 30% reduction in harmful exhaust! Conserve: Installs in seconds, no tools needed; Will not affect your vehicle’s warranty; Fits all boats, cars, trucks and SUVs.; Order yours today and start seeing the savings! Fuel OptiMiser

Product Features

• Easy to install on any car – Gas or Diesel
• Installs on the fuel line – Must go under the car or locate fuel line under the engine bay. This item is not plug and play, because you need to install it on a fuel line feeding your engine.
• Increase gas mileage up to 24% results can vary
• We offer 30 day Money Back Guarantee. Please no negative feedback if you end up not installing or want a refund. We support our customers fully. Please contact us if any trouble.
• Installation: 1. First locate your fuel supply line that feeds the engine from the fuel tank. Most vehicles will have two lines running next to each other. There will be a supply line and a return line. Carefully, while the engine is turned on, in PARK, touch the fuel line and find the colder one. The colder fuel line is your fuel supply line. If it’s very cold outside, your going have to install the product in a warmer garage. Otherwise, you can do a visual check determine which is your supply line. 2. Position the two parts of the fuel saver on opposite ends onto your fuel line. Use the built in screws to tighten. Because of the cleaning and removal process of carbon deposits in your cylinders, the fuel consumption may increase during the beginning cleaning cycle. Your vehicles mileage will stabilize after a short period. You will see noticeable improvements after 3 full gas tanks or about 1000 miles. It is highly recommended that you insure your air filter is clean. If possible adding fuel cleaners to your gas tank will make the cleaning of your engine go faster. Improved performance and a smoother running engine will usually be noticed.

Customer Reviews

OK so I am a believer- I have looked at this product for years- read reviews and due to the fact I have been a diesel mechanic for 20 years always thought it to be B/S- but- I have a 1988 wrangler-brand new carb-complete tune up- oil change-would not pass NJ emissions – I tweeked the carb- reset the timimg and still had HC % way too high.- I bought the Fuel Optimiser- put it on drove for a week and went to inspection again- HC % dropped from 1094 to .01 jeep runs smoother and more responsive-up to almost 20mpg- exhaust smell that was present is gone. Why- older engines run at like 40-60% efficiency at best, the magnet gets them up to around 80-90% efficiency- much like newer cars today. This product is a must have for any older pre-computer vehicle. Dont bother putting one on a computerized vehicle-you will probably not see or feel any difference- I am buying 2 more and putting them on my boat this spring- see if I can get a few less gallons per hour out of my big blocks. WELL WORTH THE $$$$

Hydrogen Fuel Cells of Solaire Energy Systems

This is into offering the clients with best quality Hydrogen Fuel Cells that is manufactured in compliance with set industrial standards. Their range of Hydrogen Fuel Cells serves the requirements of various sectors. These Hydrogen Fuel Cells are known for their effective performance and optimum quality among the clients.
Salient Features :

• Noiseless operation
• Zero harmful emissions
• Lighter and smaller than generators
• Stores more energy than batteries
• Low maintenance cost

Specifications :

• 50W, 100W, 200W, 300W etc continuous for 50 W, 100W, 200W, 300W etc Cap System,75 ,150W, 250W , 350 W etc peak
• 1 AC port 240V or 1 AC port 110V
• 2 USB ports 5V DC
• Energy Storage: 350Wh for 50 W System per Cartridge refill
• Cartridge activation using normal water
• HOD Fuel Cells are also available for 100W, 200W, 300W, 400W, 500W and 1kW

Applications :

• Home
• Small office
• Shop owners
• Warehouse
• Service industry